T-Q5 user's manual
T-08 user manual book
H9 user's manual
The whole vehicle regular maintenance
In addition to the normal use of the inspection, the vehicle also needs regular maintenance and maintenance. The car should be maintained for the first time in the second month. After that, it is recommended to go to the Slane professional after-sales service station for comprehensive inspection and maintenance every three months to evaluate the performance of the vehicle. The maintenance items are as follows:
No. | inspection item | scope of examination |
Routine safety checks | ||
1 | Tyre inspection | Tire pressure value, tire wear degree |
2 | Brake system inspection | Braking free travel, brake line, brake pads and brake disc wear, Brake power switch |
3 | The horn check | Line solder joints and insulation |
4 | Mirror check | Hold the rear viewing angle, range, lenses, and screws |
5 | Inspection of various lamps and lanterns | Installation position, irradiation Angle, line and insulation |
6 | Meter check | Instrument indication and wiring |
7 | Fastener inspection | Tighten the nuts and bolts |
8 | Speed and turn to check | Schedule location |
Structural inspection | ||
1 | Front and rear wheel examination | End jump, path jump, crack, deformation |
2 | The handlebars check | Rotation condition, rotation range |
3 | Frame, rear level and righteousness inspection | Fighten all welding points and nuts |
4 | Check again before | Tightening condition, eight-piece bowl, bearings |
5 | Check of the front and rear shock absorber | Check the damping stroke and seal inspection |
6 | Lock check | Action flexibility, assembly and adjustment |
Important parts | ||
1 | Battery inspection | Voltage equalization, electrolyte, solder joints, insulation |
2 | Motor inspection | End cover, bearing, hall, signal line, motor line, case insulation |
3 | Controller check | Under voltage and over current protection |
4 | Charger inspection | Charging current, charging voltage |
5 | Main beam inspection | Line solder joints, insulation and wear condition |
Vehicle parts warranty period and scope
1. For the frame and rear fork, the warranty period for the following conditions is 5 years (all warranty periods are calculated from the date of shipment):
1.1. 1. Natural detachment, welding failure, or fracture.
1.2. 2. Natural deformation, fracture, or quality issues caused by manufacturing defects.
2. For the motor, the warranty period for the following conditions is 30 months:
2.1. 1. Coil burnout or magnet degradation, detachment.
2.2. 2. Cracking of the housing, hub, or motor shaft fracture.
3. Other components have a warranty period of 15 months.
4. Tires, lights, plastic parts, brake pads, disc brake discs, fuses, chains, and easily damaged bearings are not within the warranty scope.
5. Electronic control products not listed in this document, experiencing performance failure due to manufacturing defects and irreparable, have a warranty period of 15 months.
6. The following conditions are not covered by the warranty terms:
3.1. 1. Malfunctions caused by the user not following the user manual for correct usage, maintenance, and adjustments.
3.2. 2. Damage caused by smoking, drugs, chemical corrosion, or uncontrollable factors such as earthquakes, typhoons, fires, and floods.
3.3. 3. Users not repairing at designated maintenance centers, self-modification, disassembly, or component damage.
3.4. 4. Damage to other components caused by the use of non-original parts or unauthorized modifications to the circuit and configuration.
3.5. 5. Malfunctions caused by collisions, falls, overloading, speeding, and other human factors.
7. Lead acid battery have a warranty period of 12 months.